high pressure vortex blower

high pressure vortex blower

Overview of High Pressure Vortex Blower


Fast heat dissapation
Good corrosion resistance & high temperature resistance
Small variation
Large air volume & high wind pressure
Superior performance

Descriptions of High Pressure Vortex Blower


The FHT high pressure vortex blower is also called air ring vacuum pump. The vortex blower can be regareded as the high pressure vortex blower which the wind pressure is 30kPa~200kPa or the compression ratio e is 1.3~3 and it is different from the centrifugal high pressure vortex blower. The high-pressure vortex blower has no other parts apart from the impeller, and the impeller is directly connected to the motor, with no gear or belt drive and which makes the high pressure vortex blower durable, realiable and maintainence-free.
Details of High Pressure Vortex Blower

The shell of TFHT high pressure vortex blower is made of high quality and high rigity aluminum alloy precision die-cast moldingand it features lightweight, good corrosion resistance and it never get rusty.
The air inlet of the high pressure vortex blower is equipped with the filterwhich could filter mud impurities effectively and keep the fan inside clean.
The sound damping sponge is installed in the wind pipe in order to reduce vibration and noise effectively.
The bearings adopt imported fully sealed steel bearings which features high temperature resistance and strong abrasion resistance.

Applications


The FHT high pressure vortex blower are widely used in electronic equipment, UV equipment, drying equipment, printing machinery equipment, plastic machinery equipment, packaging machinery, purification equipment, baking machines and other types of machinery, paper cutter, combustion & deaerator, cigarette filter molding machine, electroplating bath mixer, atomizing dryer, filament printing machine, photographic plate making machine, liquid filling machine and so on.
Precautions

The high pressure vortex blower must be installed in the room without being harassed by wind and rain.
The ambient temperature: ≤40℃
The relative humidity: ≤80%
If the air contains acid, alkalineand other corrosive or flammable gases, the high pressure vortex blower should not be operated.
The high pressure vortex blower should not be uesd in such occassions with a lot of dust, powder or fiber. If necessary, please install a filter, and clean the dust attached to the filter and the interior of the high pressure blower regularly.

Specification Table of High Pressure Vortex Blower


 

drawing